Home
Search results “Stepper motors catalog”
How to Understand the Difference Between Servo & Stepper Systems
 
03:57
Be sure to visit our knowledge Center - http://www.innovativeidm.com/Resources.aspx Innovative IDM 1625 Wallace Drive, Ste. 110 Carrollton, Texas 75006 Call: 877-906-2100 Hi, Adam Ring here, and I’d like to talk a little bit about the differences between stepper motors and servo motors. Now basically there is a difference in the way they are structured and controlled. Stepper is typically 50 – 100 pull brushless motor where a servo is basically a 4 – 12 pull brushless motor. The stepper as you can see here typically doesn’t have any kind of encoder for feedback, sometimes you can add it later on as an option where a servo is always built with some sort of feedback device whether it be an encoder or a resolver in order to tell its drive the position of its motor shaft. Now if we take a look at the speed torque curve for each of these motors they’re very different. A stepper motor has a lot of torque at slower speeds, in fact quite a bit of holding torque because of so many pulls it can have a lot of holding torque at low speed, and then the faster that you run, that torque actually starts to drop off. But you look at the speed torque curve of a servo motor its actually very, very flat, and you get a constant torque regardless of what speed you’re traveling up until its maximum speed. Now we look at the amount of current that a particular motor draws, a stepper motor typically is gonna draw full current whether it’s standing still or running. In some cases drives that you use with them may have a feature where you can reduce the current if they sit still for a long enough time but other than that they are basically just drawing full current all of the time which also produces extra heating as you can imagine. Servo motor on the other hand, It only uses the amount of current that’s required in order to get the motor to hold or move as demanded by the application. So typically they are going to run a lot cooler and they also have a neat little feature that enables them to produce on occasion 2 – 3 times their rated torque for short periods of time as a peak rating. And we look at the cost of installing a stepper or a servo motor. As you can imagine a stepper motor is typically going to cost less. The motor construction is simpler, you don’t typically have the feedback, and the electronics to control the motor are typically simpler and less expensive. With a servo motor obviously they are going to have some type of feedback device built into the motor and then the drives that we use to control them typically are a little more involved when it comes to how they are designed and built and typically costs a little bit more. Little bit about the application these might be used in. the stepper motor is used in applications requiring about 2000 rpm or less where you need a lot of torque at the low end, where as a servo motor is typically used for your higher speed applications that are more dynamic and require more acceleration and deceleration typically 2000 rpm and higher. So depending on whether you’re doing indexing moves with a light load or really dynamic moves with higher loads you can choose whether to use the stepper or the servo motor. Whether you’re in the market to purchase a stepper motor or a servo motor or not really sure which one is the best choice, visit innovativeidm.com we have an excellent knowledge center where you can come and research differences, catalogs, white papers, videos and learn more. After all, we are Innovative-IDM, Home of the Legendary Customer Experience.
Views: 67664 InnovativeAutomation
Stepper motor controller USB
 
02:09
USB Stepper motor controller: http://www.standa.lt/products/catalog/motorised_positioners?item=175&prod=stepper-motor-controller Stepper, BLDC and DC motor All-In-One controller: http://www.standa.lt/products/catalog/motorised_positioners?item=525 Follow us on Facebook: http://www.fb.com/Standa.ltd
Views: 20737 Standa Ltd.
Как подобрать  шаговый двигатель для станка ЧПУ.  ШД из принтера, какой подойдет для ЧПУ?
 
15:48
Шаговые двигателя и их выбор очень обширная тема и рассказать все не возможно в одном видео. Постараюсь на пальцах объяснить основные моменты которые необходимо знать при выборе шагового двигателя для станка ЧПУ. В видело когда говорю «Катушка», имею ввиду «Обмотка ШД». Извините за оговорку! 1. СNC shield v3 + A4988 брал тут http://got.by/1j7knm 2. Nema17 1.7 А : http://got.by/1j7ksh Шаговые двигателя делятся на две группы биполярные и униполярные. Драйвера L298n и СNC shield предназначены для подключения биполярных шаговых двигателей с двумя обмотками, т. е. С 4 проводами. В видео расскажу как подключить ШД с 5, 6, и 8 проводами. Также как переделать униполярный шаговый двигатель в биполярный. Расскажу как подобрать шаговые двигателя по напряжению. Основными параметрами шагового двигателя является количество шагов необходимых для того, чтобы вал двигателя повернулся на 360 градусов. В Видео рассказываю как узнать данный параметр. Одним словом все интересующие данные по двигателю можно найти в datasheet. Но не ко всем двигателям можно найти datasheet. В таких случаях придется проводить замеры и рассчитывать полученные значение. Об расчетах расскажу в следующих видео, когда буду настраивать рабочий ток шаговых двигателей и калибровать ЧПУ станок. Каталог: http://portal-pk.ru/page-4/arduino.html Там собранные комплектующими от проверенных продавцов по самым низким ценам. Боле подробное описание на сайте http://portal-pk.ru/ ----------------------------------------------------------- Уроки Arduino: Светодиоды, Резисторы, Arduino http://portal-pk.ru/page-3/uroki-svetodiody-rezistory-arduino.html Уроки Arduino: Светодиоды, Резисторы, Кнопки, Arduino http://portal-pk.ru/page-11/uroki-arduino-svetodiody-rezistory-knopki-arduino.html Уроки Arduino: Подключение датчиков и модулей к Arduino http://portal-pk.ru/page-13/uroki-arduino-podklyuchenie-datchikov-i-modulei-k-arduino.html Справочник языка Ардуино http://portal-pk.ru/page-7/spravochnik-yazyka-arduino.html Мы в контакте: https://vk.com/portal_pk Мы на фейсбук: https://www.facebook.com/groups/arduinoportalpk/
Manual Control For Stepper Motors
 
00:51
Manual control on 8SMC1-USBhF series The 8SMC1-USBhF-B1-1MC offers a handheld manual control option that allows for two button directional control of the unit in addition to the USB communication, the buttons are labeled "Forward" and "Backward". The "Forward" button is intended for moving the positioner "Forward". The "Backward" button is intended for moving the positioner "Backward". Two LED's indicate direction of movement. The LED of interest will flash to indicate rapid movement and will remain constantly illuminated upon reaching the limit switch. The handheld remote is usually used for precise manual positioning of the stage during such processes as calibration. Another common application of is for the control of stepper motors when a computer is not easily accessible. Front panel manual control is available as an option for the 8SMC1-USBhF-B2-2MC. There are four buttons on this front panel: "Forward Axis1", "Backward Axis1", "Forward Axis2" and "Backward Axis2". There are also four LED indicators to show the direction of movement along with limit switch indication. Direct link to the product: http://www.standa.lt/products/catalog/motorised_positioners?item=175&prod=microstep_driver_usb_interface Follow Us On Facebook: http://www.fb.com/Standa.ltd
Views: 8540 Standa Ltd.
catalog of ARF,AFF micro dc motors
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 34 杜淦
Stepper Motor Stage
 
01:39
Stepper Motor Stage 8MT30-50 is a newly developed stage, which incorporates all the improvements and modifications implemented since its predecessor 8MT173-20-50 was launched. 8MT30-50 replaces older stage 8MT173-20-50. It boasts possibility to operate in any orientation, which means that the stage can be hung upside-down or be operated vertically with motor facing upward or downward. Durability of stage was taken seriously into consideration and now you can apply grease directly to the screw without disassembling the stage. Vertical load capacity is increased to 3 kg. Stage is spring preloaded to eliminate backslash. Design of 8MT30-50 ensures more stable and precise motion over full translation range. For vertical (Z axis) mounting we offer angle bracket 2AB173-20-50. Angle brackets of custom design can be manufactured on request. Two mechanical limit switches built into each translation stage used for emergency stop at ends of travel range or to establish a reference position with accuracy of several motor steps (use E4 option for more accurate zero position setting, see Sensors). Motor position can be visually determined with accuracy of one step by reading a scale engraved on dial knob fitted on motor shaft (use Encoder for monitoring exact position using PC, see Sensors). Body and platform of 8MT30-50 are made of black finished aluminum. Functional parts are made of steel. Direct link to the product: http://www.standa.lt/products/catalog/motorised_positioners?item=348 Follow Us On Facebook: http://www.fb.com/Standa.ltd
Views: 2241 Standa Ltd.
catalog of BLDC motors,autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 69 杜淦
Z Motor Part 2: NEMA34 Motor Install and CNC Mill Tour
 
44:05
Today we finish up the Z motor upgrade for the CNC mill by measuring, making a motor mount and installing the motor and driver. We also spend some time tuning the motor performance in MACH3. And as long as we're taking the mill apart, we'll take a tour of the CNC conversion, the limit switch mounts and the electronics enclosure. STL files for the limit switch mounts are available here: https://www.thingiverse.com/thing:3136835 The couplers are available from McMaster-Carr: https://www.mcmaster.com/catalog/124/1275 I used the 1" diameter set-screw versions.
Views: 542 Clough42
Portescap's Advanced Stepper Technology
 
02:39
Portescap's product catalog features our advanced stepper technologies, including Can Stack Products, Linear Actuators, and Disc Magnet technologies. Portescap Can Stack Motors - http://www.portescap.com/products/can-stack-motors Portescap Can Stack Linear actuators - http://www.portescap.com/products/can-stack-linear-actuators
Views: 427 Portescap
Stepper Motor Stage (200 mm travel range)
 
01:27
Standa 200mm Travel Stepper Motor Stage 8MT200-100 Motorized Stages Huge load Easy use and combining Vacuum version available Direct link to the product: http://www.standa.lt/products/catalog/motorised_positioners?item=282 Follow Us On Facebook: http://www.fb.com/Standa.ltd
Views: 1623 Standa Ltd.
Multi-axis Motion Control System (Ethernet Interface)
 
00:55
Multi-axis Motion Control System - 8SMC4-36 More info: http://www.standa.lt/products/catalog/custom_engineering?item=560&prod=multi-%C2%ADaxis-motion-control-system For Stepper, DC and BLDC motors Supports up to 50`000 motorized positioners 19” cabinet fitment Close loop control Ethernet interface STANDA is a developer,manufacturer and global supplier of: Precision Motorized Positioners ( catalog: http://www.standa.lt/products/catalog/motorised_positioners ) Follow us on Facebook: http://www.fb.com/Standa.ltd
Views: 1582 Standa Ltd.
stepper motors of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 80 杜淦
Multi-Axis Motion Controller / Driver  (Ethernet, RS232)
 
01:18
Stepper & DC motors controller box which is developed for multi-axis motion control. It drives 8, 10, 12 axes simultaneously. Manufacturer website: http://www.standa.lt/products/catalog...
Views: 2101 Standa Ltd.
catalog of vibrating motors,autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 35 杜淦
Testing a stepper-motor-driven plastuder
 
02:14
Driving a Kysan 42BYGH243AG14 stepper motor: http://www.johnyang.com/www/pscc15 + http://www.pololu.com/catalog/product/1201 + http://www.makergear.com/products/operators-pack + http://www.kysanelectronics.com/Products/datasheet_display.php?recordID=5180
Views: 134 tyleroderkirk
2nd vivid catalog of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 104 杜淦
Pololu A4988 Stepper Motor Driver Carrier Assembly
 
00:50
Pololu A4988 stepper motor driver carrier assembly on a Samsung SM421F pick and place machine. Find out more about the product at http://www.pololu.com/catalog/product/2128. Find out more about Pololu at http://www.pololu.com/blog/29/more-fun-machines-for-us-better-quality-and-lower-prices-for-you.
catalog of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 12 杜淦
UIM241 RS232 Controller for Stepper Motor
 
08:14
RS232 type stepper motor controller www.uirobot.com [email protected] Catalog: https://drive.google.com/open?id=1GRcO43AkR2y-RWKmuggqQ7IlXJuCoBTH
Views: 117 Zhibin Zhou
TB6600 Stepper Motor Driver Board
 
18:29
Just a look at some 'equipment', I hesitate to call this a review because I have not had any experience with stepper motor driver boards, but I look at its features, show it working and talk about how to hook it up and even a little bit of theory on stepper motor operation. EEVblog Thread: http://www.eevblog.com/forum/reviews/tb6600-stepper-motor-driver-board-from-ebay/ eBay Link: http://www.ebay.ca/itm/TB6600-1-axis-Stepper-Motor-2phase-Drive-Board-for-CNC-Router-Beter-with-TB6560-/181168877379 datasheet: http://www.haoyuelectronics.com/Attachment/TB6600_module/TB6600_Datasheet.pdf Thanks for watching!
Views: 104464 James Munro
3rd catalog of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 5 杜淦
Настройка драйвера A4988 для ЧПУ.  Первый запуск шаговых двигателей
 
11:11
Подключил шаговые двигателя с разними характеристиками к CNC shield v3. Установил в микроконтроллер Arduino библиотеку gbrl 0,9j. Библиотеку не навастривал. Все настройки Arduino UNO в видео работает из коробки. Настроил драйвера A4988 .Для этого рассчитал Vref . Формула Vref для A4988 изменяется от номинала токочувствительных резисторов. Это два черных прямоугольника на плате драйвера. Обычно подписаны R050 или R100. Vref = Imax * 8 * (RS) RS = 0,100 — значение резисторов в моем случае Vref = Imax * 8 * 0,100 Произвел расчеты для 3-х типов шаговых двигателей значения Vref . Установили данные значения на драйверах A4988 к которым подключен данный двигатель. После чего провел испытания работы шаговых двигателей. Подключил к CNC shield кнопки Пауза, Продолжить и кнопку аварийной остановки. Также подключил светодиод к выводу управления шпинделем и конечный выключатель на одну ось. Испытания показали что все работает. Смутил один момент. При нажатии кнопки Пауза шпиндель не отключается. Если у кого есть решение данной проблемы напишите в комментариях. Спасибо! Каталог: http://portal-pk.ru/page-4/arduino.html Там собранные комплектующими от проверенных продавцов по самым низким ценам. Боле подробное описание и Скетч можно посмотреть на сайте http://portal-pk.ru/ ----------------------------------------------------------- Уроки Arduino: Светодиоды, Резисторы, Arduino http://portal-pk.ru/page-3/uroki-svetodiody-rezistory-arduino.html Уроки Arduino: Светодиоды, Резисторы, Кнопки, Arduino http://portal-pk.ru/page-11/uroki-arduino-svetodiody-rezistory-knopki-arduino.html Уроки Arduino: Подключение датчиков и модулей к Arduino http://portal-pk.ru/page-13/uroki-arduino-podklyuchenie-datchikov-i-modulei-k-arduino.html Справочник языка Ардуино http://portal-pk.ru/page-7/spravochnik-yazyka-arduino.html Мы в контакте: https://vk.com/portal_pk Мы на фейсбук: https://www.facebook.com/groups/arduinoportalpk/
full catalog of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 27 杜淦
Stepper Motor with Siemens 200 PLC
 
03:24
Working on Siemens 200 with Stepper Motor. In this video we have shown a practical overview of working a Stepper Motor. We provide Service on Siemens based PLC , Stepper Motor based Projects . For Details www.visionworldtech.com
Views: 19039 Vision World Tech
Tech Tip: How to Choose and Use Stepper Motor Power Supplies
 
05:58
http://www.AutomationDirect.com/stepper-systems (VID-MC-0033) - Learn how to choose the right power supply for your stepper system. Includes discussion on linear unregulated and regulated supplies To learn more visit http://www.automationdirect.com/stepper-systems To SUBSCRIBE: https://www.youtube.comhttp://www.youtube.com/user/automationdirect?sub_confirmation=1 Facebook: http://www.AutomationDirect.com/Facebook Twitter: http://www.AutomationDirect.com/Twitter Google: http://www.AutomationDirect.com/google-plus Prices were valid at the time the video was released and are subject to change Related AutomationDirect.com part numbers: STP-PWR-3204, STP-PWR-4805, STP-PWR-4810, STP-PWR-7005
Views: 9987 AutomationDirect.com
8th catalog of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 7 杜淦
Gadgeteer and Motors - Part1 - DC Motors
 
18:15
Part 1 of a series of Gadgeteer YouTube videos I'm doing that show just how easy it is to use different kinds of motors and such with Gadgeteer. In this project we use a Motor Driver L298 Module to control a Tamiya 70097 Twin-Motor Gearbox Kit. There is also a demo showing use PWM (Pulse Width Modulation) to control motor speed. Other videos in this series will show how to use Stepper and Servo motors and Encoders and Pulse counters. Parts List FEZ Cerberus Mainboard - https://www.ghielectronics.com/catalog/product/349 Character Display Module - https://www.ghielectronics.com/catalog/product/395 Motor Driver L298 Module - https://www.ghielectronics.com/catalog/product/315 USB Client SP Module - https://www.ghielectronics.com/catalog/product/330 Not sure if you can purchase the SolderMonkey TripleSlide anymore but if you need 4.3 drivers for it I have uploaded drivers for it here - https://wegadgeteer.codeplex.com/releases/view/157154 Tamiya 70097 Twin-Motor Gearbox Kit - You can get these pretty much everywhere but I got mine from - http://www.pololu.com/product/61 Source code - https://www.ghielectronics.com/community/codeshare/entry/964
Views: 1164 Duke Nukem
2nd catalog of www autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 15 杜淦
Testing PMDX-422 CNC Motion Controller and Xylotex Stepper Drive
 
03:10
I'm running out of things to do with my CNC Router hardware until my rolling chassis arrives! Dave Gatton is cutting parts for me from his new Birch Plywood router plans. Check them out: www.cncsidewinder.com www.IowaGuy.net Xylotex Stepper Drive Box and Motors http://xylotex.netfirms.com/OSCommerce/catalog/product_info.php?cPath=22&products_id=92 PMDX-422 USB SmartBOB Motion Controller http://www.pmdx.com/PMDX-422
Views: 586 Erik E
CAN Controller for Stepper Motor (UIROBOT UIM242)
 
16:14
Stepper Motor Controller UIM242 CAN control type www.uirobot.com [email protected] Catalog: https://drive.google.com/open?id=1GRcO43AkR2y-RWKmuggqQ7IlXJuCoBTH
Views: 76 Zhibin Zhou
11th catalog of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 4 杜淦
Barduino - Working Timing Belt via Stepper Motor
 
00:18
Barduino - Working Timing Belt via Stepper Motor
Views: 12236 The Barduino
9th catalog of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 2 杜淦
Stepper Driver Noise: A4988 vs DRV8825 (Updated)
 
03:33
This video is to show the difference in noise between the Pololu A4988 Stepper Motor Driver Carrier, which has 1/16 microstepping, and the DRV8825 Stepper Motor Driver Carrier which has 1/32 microstepping. These drivers are common in RepRap 3D printers. The resistor soldered onto the DRV8825 is not required on their latest versions of the board. Product links: * A4988 Driver Carrier: http://www.pololu.com/catalog/product/1182 * DRV8825 Driver Carrier (version tested): http://www.pololu.com/catalog/product/2132 * DRV8825 Driver Carrier (latest version, no external resistor necessary): http://www.pololu.com/catalog/product/2133 More videos and content at http://www.theFrankes.com.
Views: 79297 Alex Franke
10th catalog of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 0 杜淦
6th catalog of www autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 11 杜淦
2nd full catalog of autom cn
 
01:20
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 10 杜淦
5th catalog of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 6 杜淦
how to manufacture dc motor,minimotor
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 1239 杜淦
Makerslide.co.za CNC Machine Assembly Part 2
 
38:26
This video is Part 2 of the process to assemble the Makerslide.co.za CNC Machine. Sections in this video: - 00:41 Mounting the Stepper Motors - 06:51 Pulleys & Belts - 19:22 Extending & Routing the Stepper Motor Wires - 32:56 The Wasteboard 2 pair Mylar Screened Cable: http://www.communica.co.za/Catalog/Details/P3642756768 3.2mm Black Heat Shrink Sleeve: http://www.communica.co.za/Catalog/Details/P2565069852 9.5mm Black Heat Shrink Sleeve: http://www.communica.co.za/Catalog/Details/P2907531803 16mm MDF Board (1000x945mm): Available at your local board store. Ask them to cut it to size. Please be sure to subscribe to this channel and don't miss out! ►►Subscribe to my channel ►► https://goo.gl/EWMSXV ►►Become a Patron ►► https://www.patreon.com/soundblab ►►SoundBlab website and build plans ►► http://www.soundblab.net Follow me on Instagram: https://www.instagram.com/soundblab/ Follow me on Pinterest: https://za.pinterest.com/soundblab/ Follow me on Twitter: https://twitter.com/soundblabs/ Recommended Tools from Amazon.com: - Makita 18V Cordless Drill & Impact Driver: http://amzn.to/2b56Oev - Makita Finishing Sander: http://amzn.to/2b57nVG - Makita Random Orbit Sander: http://amzn.to/2aC8GXa - Makita Beltsander: http://amzn.to/2aHi63k - Makita Circular Saw: http://amzn.to/2bbhKGP - Makita Jigsaw: http://amzn.to/2bbiM5H #soundblab
Views: 6922 SoundBlab
building a BATTLE BOT, Step by Step (Part 1)
 
14:23
Have you ever wanted to see how a real battle robot is put together? Follow along as I lead you through each step of the assembly. I will share my thoughts regarding best practices and some of the techniques that will make life easier. In the second video, I will show you some of the design process and the tools I used to make this project. For those interested in the electrical parts I used (sources, prices, etc...) I have put together a little reference: PART DESCRIPTION SOURCE Battery LiFe 4S2P https://hobbyking.com/en_us/zippy-flightmax-4200mah-4s2p-30c-lifepo4-pack.html Drive Motors Scorpion 2221 http://www.scorpionsystem.com/catalog/helicopter/motors_4/hkii-22/HK-2221-2010KV/ Weapon Motor Castle 1515 https://www.amazon.com/Castle-Creations-Sidewinder-Motor-Combo/dp/B00II6SFRI/ref=sr_1_1?ie=UTF8&qid=1506462478&sr=8-1&keywords=castle+1515+motor+controller Gearbox Banebots 26:1 http://www.banebots.com/product/P60S-55-3.html Switch Whyachi MS-05 http://www.teamwhyachi.com/switches.html Although these are the parts that worked for me, they are by no means perfect and I encourage you to do your own digging for cheaper alternatives, etc...
Views: 16046 Continuous Load
7th catalog of autom cn
 
00:54
Since 1998, Autom has been specialized in developing and manufacturing various micro DC motors including DC brushed motors, DC geared motors, DC planetary geared motors, DC stepper motors, DC servo motors, brushless motors and especially blowers with built-in self-made brushless motors. Our products can be categorized into 10 series and over 100 models or types, are widely utilized all over the world, in Entertainment Systems, Automobiles, Home and Industrial Appliances, Power Tools, Medical Equipments and so on. Our annual production capability stands steadily at 30 million pieces. http://www.autom.cn/
Views: 1 杜淦
Understanding Portescap's Catalogue Data
 
05:36
Select the right miniature motor for your application using Portescap's catalog. To see our complete range of miniature motors please visit http://www.portescap.com/
Views: 372 Portescap
Electric Lid Opener Mech Demonstration - Open a Lid with an Electric Motor
 
11:42
This video shows how to use an electric motor to open a hinged lid. Order yours here - https://www.frightprops.com/electric-lid-opener.html
Views: 14991 FrightProps
XYZ Linear Portal Station
 
01:54
Standa XYZ linear positioning station High accuracy, flexible assembling, high speed and heavy load capacity Standa stages with stepper motors Motors of other types are available X-axis Standa stage: 8MT50-150BS1 with working platform Travel range: 150 mm. Resolution in 1/8 step 0.625 um Full step can be divided to 256 microsteps with Standa NANO step controller Mechanical lend limit switches Working platform (mm) 150 x 150 25mm grid of tapped holes M6 and M4 Available linear stage models with: 100, 150 and 200 mm travel range Y-axis Standa stage: 8MT50-150BS1 Travel range: 150mm. Linear Speed from 0.1 um/s to 20 mm/s with Standa NANO step controller Standa NANO Step controller Exceptionally SMOOTH movement at low speed, no irritating noise at high speed. COMPATIBLE with latest Windows, Linux, Mac including 64-bit OS versions. Full step can be divided to 256 microsteps with Standa NANO step controller Z-axis Standa stage: MT175-100 Travel range: 100mm Available linear stage models with: 50, 100, 150 and 200 mm travel range Vacuum version available Direct link to the product: http://www.standa.lt/products/catalog/custom_engineering?item=489&prod=custom Follow Us On Facebook: http://www.fb.com/Standa.ltd
Views: 3371 Standa Ltd.
Precision Rotation Stage
 
01:32
Precision Rotation Stage - 8MR190-90 Direct link to the product: http://www.standa.lt/products/catalog/motorised_positioners?item=325&prod=motorized_precision_rotation_stage Hardened steel with aluminium body Large diameter ball bearings Worm Gear Ratio is 1:120 Hall-effect reference limit switch Stepper motor or DC motor with encoder Motor can be optionally equipped with the reduction gear 1,8m long cable included Vacuum compatible versions are available up to 10-6Torr using stepper motor Very high load capacity Vacuum version Follow Us On Facebook: http://www.fb.com/Standa.ltd
Views: 4182 Standa Ltd.
Touch screen based wireless Library book issue Rs.7000/-
 
03:00
Please contact us for more information: Ph: +91 9490219339 (WhatsApp/SMS text only Please) www.sooxma.com www.mycollegeproject.com [email protected] Hyderabad, India. Students will be provided with complete working hardware kit and other related documentation. We develop customised projects as per your requirements. We are specialised in developing IoT based industrial projects usinng various sensor like Temperature, Humidity, light, water level, moisture, pressure, fire, flame sensor, air pollution, gas sensors like MQ-02,MQ-03,MQ-06 etc. Alcohol sensrs, LPG gas, LDR sensor, current CT sensor, voltage sensor for solar panels, IR (infrared) sensors, Laser light sensors, Magnetic sensors like hall effect, read switch etc, tilt sensor, sound sensor, heart rate sensor, blood pressure sensor, body temperature sensor, rain water sensor, ultrasonic distance sensor, Thermisters, PIR sensor, MEMS accelerometer sensor, Digital compass, positional sensor, Direction sensors, RTC, EEPROM, iButton reader, piezo sensors, wireless power, Load cell, weight sensors, flex sensors, Flow sensors, Resistive touch screen, APR voice module, Eye blink sensor, DHT11, LM35, Speech recognition, mp3 player, Barcode reader, color sensor, Capacitive touch sensor, energy meter, Matrix keypad, SD card reader, Tachometer (speed sensor), Nextion displays, Fuel sensors, Vibration sensor, LiFi. Motors we work with: DC Motor, PMDC motors, Servo Motor, AC Motor, Series motor, Universal motors, stepper motors, geared motors, brush less motors. We work with following communication devices. GSM Modem, GPS Receiver, IoT esp8266, RFID readers (Active and Passive), Zigbee, Bluetooth receivers, WiFi transceivers, RS232 communication, RS485, CAN communication, RF Transceiver, RF 433MHz, PLCC (Power line Carrier Communication), barcode reader, finger print reader, smart card reader, USB communication, PS2 communication, DTMF, Ethernet communication, We work with PIC Microcontrollers (8bit, 16bit, 32 bit), MSP430, PIC 12F, PIC16F, PIC18F, PIC24F, PIC32F series, STM32, Arduino (Pro mini, Nano, Uno etc), AVR, ATMEGA, esp8266, 8051, 80S52, ARM, LPC2148, Raspberry Pi, Orange Pi(Lite,One,Plus etc), Nodemcu, Wemo etc. WE develop following Hardware(sensors) accessing mechanisms: Android apps, PC based applications, Web development with IoT, TCP sockets, UDP, http, remote file systems and data loggers. Domains we work with: Security, SCADA, wireless, protection, data loggers, control systems, telecommunications, education, transport, agricultural, industrial, building autommation, home automation, access control, IoT with Android apps, solar, non-conventional power generation, medical, Robotics, advertisement displays (scrolling led sign board, P10 displays, 50-50 led sign board, pixel programmable led sign board, Displays we work with: Nokia 5110, Propeller display, 16x2 LCD displays, 20x4 displays, scrolling led displays, 128x64 graphical displays, oled (spi,i2c), TFT displays, seven segment displays, Power electronics and Switching devices: MOSFET, Transistor, Power Transistor, IGBT, SCR, TRIAC, Relays etc. We also develop IEEE projects like IEEE-2016, IEEE-2017 Student projects along with modifications. We can customise this project as per your requirements. Project Title: Touch screen based wireless Library book issue. AIM:- The project mainly aims in designing completely automated books catalog system in library with the help of touch screen sensor and a graphical LCD to control and provide a user-friendly environment of the user to register the selected the book effectively through wireless. The library catalog will be displayed automatically on the GLCD display and we can directly select the book with the help of touch screen. Working:- The device consists of a microcontroller, which is interfaced with the input and output modules, the controller acts as an intermediate medium between both of them. So the controller can be termed as a control unit. The input module is nothing but a touch screen sensor, which takes the input from the user and provides the same to the microcontroller. The output module is the RF module. The controller also takes the responsibility to display the book catalog information on the graphical LCD. At the receiving end the selected books will be displayed on GLCD.
Views: 2325 Sooxma Prabhakar
Long-Travel Motorized Linear Stages
 
01:00
Precision translation stages family with travel range from 300 mm up to 2800 mm. 8MT195/8MT295 linear positioners ensure accurate long-travel motion in automation systems. Description from manufacturer: http://www.standa.lt/products/catalog/motorised_positioners?item=259 Long-travel motorized linear stages main features: Travel range: 340...2840 mm Resolution in full step: 12,5 µm Resolution in 1/16 step: ~0,8 µm Lead screw pitch: 2.5/4/5/10 mm Max. speed** 40 mm/s Load capacity**: Horizontal: 40 kg Vertical: 10 kg **Load capacity or speed values can be increased using more powerful motors by request. Apply to Standa motorized stages catalog to see great variety of precision motorized linear stages with alternative specifications and shapes: http://www.standa.lt/products/catalog/motorised_positioners Keep an eye on STANDA in facebook: https://www.facebook.com/Standa.ltd
Views: 2478 Standa Ltd.
TigerTek Industrial Services
 
00:31
For over 35 years, Tigertek has been the single source for repairs on AC/DC motors, pumps, gearboxes, servo motors, hoists as well as machining services and new products. Conveniently located in Stoneville, NC we offer free pickup, free quotes and free delivery in our local fleet area of south central Virginia and the piedmont triad. TigerTek is a long-standing EASA (pronounced “EEESA”) member, is UL listed and offers "around–the-clock", emergency rush service for: ----------------------------------------------------------------------------- AC/DC electric motor repair for single, 3 phase, standard, metric, servo, stepper, spindle and permanent magnet motors. ----------------------------------------------------------------------------- Pump repair for piston, vane, turbine, gear, centrifugal, lobe, sump and vacuum types. ----------------------------------------------------------------------------- Gearbox repair for domestic or foreign, spur, helical, bevel and worm gears. ----------------------------------------------------------------------------- Servo motor repair of spindle, stepper and permanent magnet motors for most major brands. ----------------------------------------------------------------------------- Hoist repair for electric, pneumatic and manual types with testing up to 5 tons. ----------------------------------------------------------------------------- Machining services for reproduction, repair, upgrades and modifications. ----------------------------------------------------------------------------- New product sales for motors, drives, pumps, gearboxes and more. ----------------------------------------------------------------------------- Call TigerTek for all of your industrial repairs needs today at 336-623-1717.